您好，欢迎访问中国农业科学院 机构知识库！

全部

  • 全部
  • 标题
  • 学者
  • 机构
  • 关键词

Calibration of Parameters for Leaf-Stem-Cutting Model of Tuber Mustard (Brassica juncea L.) Based on Discrete Element Method

文献类型： 外文期刊

作者： Gu, Man 1 ; Shen, Haiyang 1 ; Luo, Weiwen 1 ; Ling, Jie 1 ; Wang, Bokai 1 ; Gu, Fengwei 3 ; Song, Shumin 4 ; Pan, Liang 4 ; Hu, Zhichao 1 ;

作者机构： 1.Minist Agr & Rural Affairs, Nanjing Inst Agr Mechanizat, Nanjing 210014, Peoples R China

2.Henan Polytech Inst, Coll Mech Engn, Nanyang 473000, Peoples R China

3.Chinese Acad Agr Sci, Grad Sch, Beijing 100083, Peoples R China

4.Chongqing Acad Agr Sci, Chongqing 401329, Peoples R China

关键词： discrete element method (DEM); tuber mustard; parameter calibration; cutting mechanics

期刊名称：AGRICULTURE-BASEL （ 影响因子：3.6； 五年影响因子：3.8 ）

ISSN：

年卷期： 2025 年 15 卷 7 期

页码：

收录情况： SCI

摘要： The cutting of leaf stems is a critical step in the mechanized harvesting of tuber mustard (Brassica juncea L.). This study focuses on the calibration of parameters for the discrete element model of mustard leaf stems to visualize the cutting process and facilitate numerical simulations. Intrinsic material properties were measured based on mechanical testing, and EDEM2022 simulation software was utilized to calibrate the model parameters. The Hertz-Mindlin (no-slip) model was employed to simulate the stacking angle of mustard leaf stems, and the contact parameters for the discrete element model were determined using a combination of two-level factorial design, steepest ascent, and CCD (central composite design) tests. The results showed that the coefficient of restitution, coefficient of static friction, and coefficient of rolling friction for the leaf stems were 0.45, 0.457, and 0.167, respectively, while for interactions between the leaf stems and the working parts, these values were 0.45, 0.55, and 0.175, respectively. Based on the Hertz-Mindlin with bonding model, the primary bonding parameters were calculated, and a BBD (Box-Behnken design) test was applied for optimization. The comparison between the simulation and experimental results showed that the relative error in the maximum shear force was within 5%, indicating that the calibrated model can serve as a reliable theoretical reference for the design and optimization of tuber mustard harvesting and cutting equipment.

  • 相关文献
作者其他论文 更多>>
置顶
购物车
反馈

© 京ICP备09089781号-29 主办单位：中国农业科学院

学术资源： 中国农业科学院 农业专业知识服务系统 农科联盟资源共建共享平台 中国农业科技文献与信息服务平台 中国农业期刊集成服务平台