您好，欢迎访问中国农业科学院 机构知识库！

全部

  • 全部
  • 标题
  • 学者
  • 机构
  • 关键词

Analysis and Evaluation of the Experimental Effect of Double-Disc Knife-Cutting Device for Carrot Combine Harvester

文献类型： 外文期刊

作者： Wang, Bokai 1 ; Hu, Zhichao 1 ; Gu, Fengwei 1 ; Wu, Feng 3 ; Cao, Mingzhu 1 ; Sun, Yunjing 4 ;

作者机构： 1.Minist Agr & Rural Affairs, Nanjing Inst Agr Mechanizat, Nanjing 210014, Peoples R China

2.Minist Agr & Rural Affairs, Key Lab Modern Agr Equipment, Nanjing 210014, Peoples R China

3.Chinese Acad Agr Sci, Beijing 100081, Peoples R China

4.Shandong Agr Machinery Technol Extens Stn, Jinan 250100, Peoples R China

关键词： carrot; disc cutter; root damage rate; stem and leaf cut cleanliness; cutting surface flatness rate

期刊名称：AGRICULTURE-BASEL （ 影响因子：3.6； 五年影响因子：3.8 ）

ISSN：

年卷期： 2025 年 15 卷 7 期

页码：

收录情况： SCI

摘要： At present, the problems of the low cutting reliability and poor cutting quality of carrot harvesters in China are particularly prominent, directly leading to the problems of high root and stem damage rates, low stem and leaf cutting rates, and low cutting surface flatness rates. In order to solve these problems, we developed a disc-type double-disc cutting device. Based on the structural analysis and the central combination design theory of Box-Behnken, using three factors as influencing factors, namely, clamping and conveying speed, the rotary speed of the disc cutter, and the thickness of the disc cutter. A response surface experiment was carried out to analyze the influence of each factor on the high damage rates of the rhizome, the clean rates of stems and leaves, and the flatness rate of cutting surfaces to optimize the influencing factors. According to the test results, a regression mathematical model between test parameters and performance indexes was established, and optimization verification was carried out according to the regression model between test factors and indexes. Finally, the optimal parameter combination is as follows: a clamping and conveying speed of 1.0 m/s, a rotary speed of the disc cutter of 193.5 r/min, and a thickness of the disc cutter of 3.6 mm. The results of the field experiment showed that the root and stem damage rate was 2.61%, the stem and leaf-cutting rate was 87.32%, and the cutting surface flatness rate was 89.87%. Compared with a set of parameters commonly used in double-disc cutters to harvest carrots under the same conditions, the corresponding root and stem damage rates, stem and leaf-cutting rates, and productivity decreased by 2.16%, 1.97%, and 1.87%, respectively, and the comprehensive performance was obviously improved. The proposed research method can well simulate the cutting process in carrot harvesting and provide support for the development of carrot harvesting equipment.

  • 相关文献
作者其他论文 更多>>
置顶
购物车
反馈

© 京ICP备09089781号-29 主办单位：中国农业科学院

学术资源： 中国农业科学院 农业专业知识服务系统 农科联盟资源共建共享平台 中国农业科技文献与信息服务平台 中国农业期刊集成服务平台