Preliminary Investigation of Polystyrene/MoS_2-Oleylamine Polymer Composite for Potential Application as Low-dielectric Material in Microelectronics
文献类型: 会议论文
第一作者: Salvatore Iannace
作者: Salvatore Iannace 1 ; Andrea Sorrentino 1 ; Giovanni Landi 1 ; Claudia Altavilla 1 ; Paolo Ciambelli 2 ; Heinich C. Neitzert 2 ;
作者机构: 1.Institute for Polymers, Composites and Biomaterials (IPCB-CNR), P. Enrico Fermi 1, 80055 Portici (NA), Italy
2.Department of Industrial Engineering, University of Salerno, Via G. Paolo II 132, 84084 Fisciano (SA), Italy
关键词: other properties;frequency range;blend solution
会议名称: International Conference GT70
主办单位:
页码: 020044-1-020044-6
摘要: Insulating materials play a vital role in the design and performance of electrical systems for both steady and transient state conditions. Among the other properties, also in this field, polymer nanocomposites promise to offer exciting improvements. Many studies in the last decade has witnessed significant developments in the area of nano-dielectric materials and significant effects of nano-scale fillers on electric, thermal and mechanical properties of polymeric materials have been observed. However, the developments of new and advanced materials to be used the miniaturization of electronic devices fabrication require extensive studies on electrical insulation characteristics of these materials before they can be used in commercial systems. In this work, Polystyrene (PS) composites were prepared by the blend solution method using MoS_2@Oleylamine nanosheets as filler. The dielectric properties of the resulting comoposite have been investigated at 300K and in the frequency range between 1000 Hz and 1 MHz. The addition of the MoS_2@Oleylamine nanosheets leads to a decreasing of the relative dielectric constant and of the electrical conductivity measured in the voltage range between ±500V. Thanks to a possibility to tune the electrical permittivity with the control of MoS_2 concentration, these materials could be used as a low-dielectric material in the microelectronics applications.
分类号: o63-532
- 相关文献
作者其他论文 更多>>
-
Measurement of Strain on 3D-Printed Foot Prosthesis Using Fiber Bragg Grating Sensors
作者:Sara Del Chicca;Abdel Rahman Nedal Ibrahim Al Thahabi;Luca Michele Martulli;Gennaro Rollo;Jacopo Romanò;Lorenzo Garavaglia;Andrea Bernasconi;Marino Lavorgna;Andrea Sorrentino;Simone Pittaccio;Emanuele Gruppioni;Paola Saccomandi;Marco Tarabini
关键词:Performance evaluation;Optical fibers;Optical fiber sensors;Fiber gratings;Three-dimensional printing;Strain measurement;Monitoring
-
Characterization of Poly(butylene succinate)/glycerol Co-plasticized Thermoplastic Gelatin Prepared by Melt Blending
作者:Maria Oliviero;Andrea Sorrentino;Salvatore Iannace
关键词:main goal;incorporation;samples containing
-
Rapid Control of Mold Temperature during Injection Molding Process: Effect of Packing Pressure
作者:Sara Liparoti;Andrea Sorrentino;Giuseppe Titomanlio
关键词:effect;resulting morphology;mold temperature


