您好，欢迎访问中国农业科学院 机构知识库！

全部

  • 全部
  • 标题
  • 学者
  • 机构
  • 关键词

Improving simulation accuracy of a drip irrigation tooth emitter: Simulation and verification of tooth tip fillet

文献类型： 外文期刊

作者： Qiu, Xuefeng 1 ; Wang, Haitao 1 ; Leng, Qiankun 4 ; Xu, Suojun 5 ; Wang, Jiandong 1 ; Yang, Hongyi 4 ; Mei, Xurong 1 ;

作者机构： 1.Chinese Acad Agr Sci, Inst Environm & Sustainable Dev Agr, Beijing 100081, Peoples R China

2.CAAS, Inst Western Agr, Changji 831100, Xinjiang, Peoples R China

3.CAAS, CAU, State Key Lab Efficient Utilizat Agr Water Resourc, Beijing, Peoples R China

4.China Inst Water Resources & Hydropower Res, Beijing 100038, Peoples R China

5.Beijing Water Saving & Water Management Serv Ctr, Beijing 101117, Peoples R China

关键词： Emitter; Tooth tip fillet; CFD; Energy dissipation; Hydraulic characteristics; Simulation accuracy

期刊名称：BIOSYSTEMS ENGINEERING （ 影响因子：5.3； 五年影响因子：5.9 ）

ISSN： 1537-5110

年卷期： 2025 年 258 卷

页码：

收录情况： SCI

摘要： Numerical simulations are a reliable and commonly used research method for optimizing the structure of toothed labyrinth channels. However, simulations often involve a physical model of the sharp angle (SA) that is inconsistent with the actual emitter, which distorts the results to a certain extent. This study investigated two tooth-tip filleting methods (constant and variable angles) with five radii (r0.02-r0.10 mm) and compared them with SA, analysing impacts on hydraulic characteristics. Results showed sharp angles widened flow channels by 22.77-22.85 % versus r0.10 mm fillets, reduced emitter flow rates by 23.66-27.94 % under each pressure gradients, and overestimated energy dissipation by 40.36-43.41 %. Internally, SA increased wake vortex areas at tooth tips, Q-criterion vortex intensity was overestimated by 27.75-45.04 %, while mean flow velocity, turbulent kinetic energy (TKE), and TKE dissipation rates were overestimated by 12.66-14.10 %, 18.84-20.59 %, and 20.52-22.42 %, respectively. TKE and dissipation rate zones were overestimated by 50.51-57.96 % and 37.55-47.84 %. Hence, when the SA physical model was used to optimise the structure of the toothed labyrinth channel, in addition to the deviation from the physical structure of the emitter, there were large deviations in the simulation calculations of the flow rate, energy dissipation, and internal hydraulic characteristics. However, the filleted-tooth tip, which was consistent with the machining accuracy of the emitter, further improved the simulation accuracy. The results provide important reference values for the optimal design of drip irrigation emitters and reducing their processing costs.

  • 相关文献
作者其他论文 更多>>
置顶
购物车
反馈

© 京ICP备09089781号-29 主办单位：中国农业科学院

学术资源： 中国农业科学院 农业专业知识服务系统 农科联盟资源共建共享平台 中国农业科技文献与信息服务平台 中国农业期刊集成服务平台